-
-
HPE Aruba Networking Instant On Switch 8p Gigabit CL4 PoE 2p SFP 124W 1930, JL681A
14.200,00 EGP14.200,00 EGP×
SaleHot
Huawei eKitEngine Access Point
Huawei eKitEngine AP673 is a next-generation indoor access point (AP) that complies with the Wi-Fi 7 (802.11be) standard. It supports eight spatial streams on the 2.4 GHz (2×2 MIMO), 5 GHz (2×2 MIMO), and 6 GHz (4×4 MIMO) frequency bands, delivering a data rate of up to 13.66 Gbps.
It has built-in smart antennas, ensuring always-on signals for users. With the all-new Wi-Fi 7 technology, this AP can greatly improve users’ wireless network experience. Compact in size, it can be flexibly deployed and saves customer TCO. These strengths make this AP ideal for indoor coverage scenarios such as small and midsize enterprise office, hospitals, and shopping malls and supermarkets.
You can use the EasyWeb or wireless access controller (WAC) to locally deploy and manage APs, or use the HUAWEI eKit App & SNC platform to remotely manage and maintain APs. In this way, network projects can be handed over or managed together, simplifying network O&M.
- Wi-Fi 7 (802.11be) Standard
- Wi-Fi 7 (802.11be) — also known as IEEE 802.11be Extremely High Throughput (EHT) — is the latest upcoming Wi-Fi standard. Based on Wi-Fi 6, Wi-Fi 7 introduces technologies such as 320 MHz bandwidth, 4096-quadrature amplitude modulation (4096-QAM), multiple resource unit (MRU), multi-link operation (MLO), enhanced multi-user multiple-input multiple-output (MU-MIMO), and multi-AP coordination. In this way, Wi-Fi 7 delivers a higher data transmission rate and a lower latency than Wi-Fi 6
- High-Speed Tri-Band Access
- The AP supports 320 MHz frequency bandwidth on the 6 GHz frequency band, which increases the number of available data subcarriers and expands transmission channels. In addition, the AP adopts 4096-QAM and MU-MIMO to achieve a rate of up to 0.69 Gbps on the 2.4 GHz band, 1.44 Gbps on the 5 GHz band, and 11.53 Gbps on the 6 GHz band, meaning up to 13.66 Gbps for the device.
- Smart Antenna
- The dual-band smart antenna array technology and intelligent switchover algorithm enable the AP to intelligently sense the application environment and access density, achieving accurate Wi-Fi coverage and interference suppression. They together provide the optimal coverage direction and signal quality for each access station (STA), and offer seamless and smooth wireless network experience to users.
| Condition | New |
|---|---|
| Model | eKitEngine AP673 Access Point |
| Wi-Fi generation | Wi-Fi 7 |
| Positioning | settled |
| PoE Support | Yes |
| Uplink ports | 1 x 100M/GE/2.5GE/5GE electrical port |
| MIMO | (2.4 GHz): 2×2, (5 GHz): 2×2, (6 GHz): 4×4 |
| Power | 21.1 W |
| Dimensions | 7.2 x 26 x 25.5 cm |
| Weight | 1.23 Kg |
| Warranty | 3Yrs |
| Basic Information | |
| Description | AP673(11be indoor,2+2+4 tri bands,smart antenna,USB,BLE) |
| Part Number | 50087291 |
| Model | AP673 |
| First supported version | V600R024C00 |
| Technical Specifications | |
| Installation Type | Wall,Ceiling,T-Rail |
| Dimensions without packaging (H x W x D) [mm(in.)] | Diameter x depth: 220 mm x 45 mm (8.66 in. x 1.77 in.) |
| Dimensions with packaging (H x W x D) [mm(in.)] | 72 mm x 260 mm x 255 mm (2.83 in. x 10.24 in. x 10.04 in.) |
| Weight without packaging [kg(lb)] | 0.745 kg (1.64 lb) |
| Weight with packaging [kg(lb)] | 1.230 kg (2.71 lb) |
| Storage | NAND Flash 512 MB |
| Console port | Bluetooth console |
| Maximum power consumption [W] | 21.1 W (excluding USB) |
| Maximum heat dissipation [BTU/hour] | 66 |
| Power supply mode | PoE,DC power adapter |
| Rated input voltage [V] | 12 V |
| Input voltage range [V] | DC: 12 V ± 10% |
| PoE: 802.3at/af | |
| Service port surge protection | PoE port: |
| Differential mode (48 V-RTN): 0.5 kV (1.2/50 us, 42 ohms), criterion B | |
| Common mode (8 wires to ground): 4 kV (1.2/50 us, 42 ohms), criterion B | |
| PoE OUT | Not supported |
| Maximum number of physical ports on the entire device | 5GE (RJ45) x 1, 100M/1000M/2500M/5000M auto-sensing |
| GE (RJ45) x 1, 10M/100M/1000M auto-sensing | |
| Long-term operating temperature [°C(°F)] | –10°C to +50°C (14°F to 122°F) (From 1800 m to 5000 m [5905.51 ft. to 16404.20 ft.], the maximum temperature of the device decreases by 1°C [1.8°F] for every 300 m [984.25 ft.] increase in altitude.) |
| Storage temperature [°C(°F)] | –40°C to +70°C (–40°F to +158°F) |
| Long-term operating relative humidity [RH] | 5% RH to 95% RH (non-condensing) |
| Long-term operating altitude [m(ft.)] | –60 m to +5000 m (–196.85 ft to +16404.20 ft) |
| Atmospheric pressure [kPa] | 53kPa - 106kPa ETSI 300 019-2-3 |
| Ground | Floating ground |
| USB | USB 3.0 is unavailable currently and will be supported through software upgrade in the future. |
| IoT slot | Not supported |
| BLE | BLE5.2 |
| Radio number | 3 |
| Operating frequency band | 2.4GHz,5GHz,6GHz |
| MIMO spatial streams | Radio 0 (2.4 GHz): 2x2 |
| Radio 1 (5 GHz): 2x2 | |
| Radio 2 (6 GHz): 4x4 | |
| Wi-Fi standard | 2.4 GHz: 802.11b/g/n/ax/be |
| 5 GHz: 802.11a/n/ac/ac Wave 2/ax/be | |
| 6 GHz: 802.11a/ax/be | |
| Radio interface | Built-in smart antennas |
| Antenna gain | 2.4 GHz: |
| 4 dBi/chain (peak gain) | |
| 2 dBi (combined gain) | |
| 5 GHz: | |
| 5 dBi/chain (peak gain) | |
| 3 dBi (combined gain) | |
| 6 GHz: | |
| 5 dBi/chain (peak gain) | |
| 3 dBi (combined gain) | |
| BT: 4 dBi | |
| Maximum transmit power | 2.4 GHz: |
| 20 dBm/chain | |
| 23 dBm (combined power) | |
| 5 GHz (2x2): | |
| 20 dBm/chain | |
| 23 dBm (combined power) | |
| 6 GHz (4x4): | |
| 20 dBm/chain | |
| 26 dBm (combined power) | |
| BLE: < 10 dBm | |
| MTBF [year] | 110.878 |
| MTTR [hour] | 2 |
| Frequency stability [ppm] | +/-20 |
| 802.3bt power supply description | The power supply mode is negotiated to 802.3at. |
| When the 5 W USB port is used, the maximum transmit power of radios 0, 1, and 2 decreases by 3 dBm. | |
| Other functions are not restricted. | |
| 802.3at power supply description | The power supply mode is negotiated to 802.3at. |
| When the 5 W USB port is used, the maximum transmit power of radios 0, 1, and 2 decreases by 3 dBm. | |
| Other functions are not restricted. | |
| 802.3af power supply description | The power supply mode is negotiated to 802.3af. |
| Wi-Fi service: A maximum of 2.4 GHz (2x2) + 5 GHz (2x2) is supported. | |
| The USB is unavailable. Other functions are not restricted. | |
| DC power supply description | No function is limited. |
Only logged in customers who have purchased this product may leave a review.
Reviews
There are no reviews yet.