Product Details
Figure 2 shows the front panel of Aruba J9772A.
Note:
- Power, Fault, and Locator LEDs
- Console Port
- LED Mode select button and indicator LEDs
- 48 RJ-45 autosensing 10/100/1000 PoE+ ports
- 4 SFP slots
Hot
Aruba HPE J9772A 2530 Switch -imported
Aruba HPE J9772A 2530 Switch -imported – J9772A
150.000,00 EGP 14% inc VAT
Contact us on WhatsApp Buy Now| J9772A Specifications | |
| Type | Aruba 2530-48G-PoE+ Switch |
| System Specifications | |
| Ports |
|
| Memory and processor | Processor: ARM9E @ 800 MHz, 128 MB flash, 256 MB DDR3 DIMM; packet buffer size: 3 MB dynamically allocated. |
| Mounting | Mounts in an EIA-standard 19-inch telco rack or equipment cabinet (rack-mounting kit available); horizontal surface mounting; wall mounting. |
| Management | IMC - Intelligent Management Center; Command-Line Interface (CLI); Web browser; configuration menu; out-of-band management (serial RS-232C or Micro USB); IEEE 802.3 Ethernet MIB; Repeater MIB; Ethernet Interface MIB. |
| Performance (IPv6 Ready Certified) | |
| 1000 Mb latency | < 2.3 s (LIFO 64-byte packets) |
| 100 Mb Latency | < 7.4 s (LIFO 64-byte packets) |
| Throughput | Up to 77.3 million pps (64-byte packets) |
| Switching capacity | 104 Gb/s |
| MAC address table size | 16000 entries |
| Physical specifications | |
| Dimensions (W x D x H) | 44.3 x 32.26 x 4.45 cm (17.44 x 13.00 x 1.75 in) (1U height) |
| Weight | 4.72 kg (10.4 lb) |
| Electrical specifications | |
| Maximum heat dissipation | 236 BTU/hr (248.98 kJ/hr), (switch only: 236 BTU/hr; combined switch + max. PoE devices: 1624 BTU/hr) |
| Voltage | 100 - 127 / 200 - 240 V ac |
| Current | 5.8/2.9 A |
| Idle power1 | 40.1 W |
| Maximum power rating2 | 476 W |
| PoE power | 382 W |
| Frequency | 50/60 Hz |
| NOTE:1:Idle power is the actual power consumption of the device with no ports connected. 2:Maximum power rating and maximum heat dissipation are the worst-case theoretical maximum numbers provided for planning the infrastructure with fully loaded PoE (if equipped), 100% traffic, all ports plugged in, and all modules populated. PoE power is the total power budget available to all PoE ports. | |
| Environmental specifications | |
| Operating temperature | 0 to 45C (32 to 113F) |
| Operating relative humidity | 15% to 95% @ 40C (104F), noncondensing |
| Non-operating/storage temperature | -40 to 70C (-40 to 158F) |
| Non-operating/storage relative humidity | 15% to 90% @ 65C (149F), noncondensing |
| Altitude | Up to 3 km (10,000 ft) |
| Acoustic | Power: 33.6 dB, Pressure: 43.9 dB |
| Safety agency certifications | |
| Safety | UL 60950-1; CAN/CSA 22.2 No. 60950-1; EN 60825; IEC 60950-1; EN 60950-1 |
| NOTE:IEEE 802.3az applies to Gigabit models only; IEEE 802.3at and IEEE 802.3af apply to PoE+ models only. When using SFPs with this product, SFPs with revision "B" or later (product number ends with the letter "B" or later, e.g., J4858B, J4859C) are required. | |
Reviews
There are no reviews yet.