| RV260-K9-G5 Specification |
| Device Dimension |
L x W x H:279.4x170x38.5 mm |
| Ethernet WAN |
1 RJ-45 SFP Gigabit combination port |
| Ethernet LAN |
8 RJ-45 Gigabit Ethernet ports |
| RV260P has 4 PoE ports with a 60W power budget |
| Console port |
1 RJ-45 port |
| Switch |
Power on/off |
| Cabling type |
Category 5 or better |
| LEDs |
Power, VPN, WAN, LAN |
| Operating system |
Linux |
| LAN |
| VLANs |
16 |
| Port security |
Yes, 802.1X |
| IPv6 |
Dual stack, 6rd, 6in4 |
| WAN |
Dynamic Host Configuration Protocol (DHCP) client, static IP, Point-to-Point Protocol over Ethernet (PPPoE), PPTP, Layer 2 Tunneling Protocol (L2TP) |
| WLAN |
3x3 802.11ac Wave 2 |
| Security |
| Firewall |
SPI firewall |
| Port forwarding and triggering |
| Denial-of-Service prevention (DoS) |
| Access control |
IP access control lists |
| Secure management |
HTTPS, username/password complexity |
| User privileges |
Two levels of access: Admin and guest |
| Network |
| Network protocols |
• Dynamic Host Configuration Protocol (DHCP) server |
| • Point-to-Point Protocol over Ethernet (PPPoE) |
| • Point-to-Point Tunneling Protocol (PPTP) |
| - Layer 2 Tunneling Protocol (L2TP) |
| • DNS proxy |
| • DHCP relay agent |
| • Internet Group Management Protocol (IGMP) proxy and multicast forwarding |
| • Rapid Spanning Tree Protocol (RSTP) |
| • Dynamic DNS (DynDNS, No-IP, ChangeIP) |
| • Network Address Translation (NAT), Port Address Translation (PAT) |
| • One-to-one NAT |
| • Port management |
| • Port mirroring |
| • Software-configurable DMZ to any LAN IP address |
| - Session Initiation Protocol (SIP) Application Layer Gateways (ALG) |
| Routing protocols |
• Static routing, IGMP proxy |
| • Dynamic routing |
| • Routing Information Protocol (RIP) v1 and v2 |
| • RIP for IPv6 (RIPng) |
| - Inter-VLAN routing |
| NAT protocol |
Port Address Translation (PAT), Network Address Port Translation (NAPT)
Port forwarding, One-to-one NAT, VPN NAT Traversal, Session Initiation Protocol (SIP), ALG, FTP ALG |
| VPN |
| Gateway-to-gateway IPsec VPN |
20 IPsec tunnels |
| Client-to-gateway IPsec VPN |
20 IPsec tunnels |
| IPsec VPN |
Internet Key Exchange (IKE) v2, Generic Routing Encapsulation (GRE), hub and spoke supported |
| PPTP VPN |
20 PPTP VPN tunnels |
| OpenVPN |
Support for the OpenVPN server |
| Encryption |
Triple Data Encryption Standard (3DES), Advanced Encryption Standard (AES) with 128, 192, and 256-bit keys encryption |
| VPN pass-through |
IPsec, PPTP, and L2TP pass-through |
| Quality of Service (QoS) |
| QoS |
• 802.1p port-based priority on LAN port, application-based priority on WAN port |
| • 4 queues |
| • Differentiated Services Code Point (DSCP) support |
| • Class of Service (CoS) |
| • Bandwidth management for service prioritization |
| Jumbo frame support |
Supports jumbo frames on Gigabit ports – at least 1536B |
| Performance |
| NAT throughput |
800+ Mbps |
| Concurrent sessions |
25,000 |
| IPsec VPN throughput |
75+ Mbps |
| Configuration |
| Web-based user interface |
Browser-based configuration (HTTP/HTTPS) |
| Management |
Web-based user interface, Simple Network Management Protocol (SNMP) v3, Bonjour, PnP |
| Command-line interface via console – limited configuration command support |
| FindIT support for monitoring and management |
| Event logging |
Local, syslog, email alerts |
| Network diagnostics |
Ping, traceroute, DNS lookup |
| Upgradability |
Firmware upgradable via browser UI, imported/exported file, USB, Cisco FindIT |
| System time |
Network Time Protocol (NTP), Daylight Savings, manual entry |
| Language support |
User interface support: English |
Reviews
There are no reviews yet.